Daewoo DTC-400, Руководство пользователя

Страница: 16 / 43

ENG
16
2. When you hear the dial tone, dial the desired number.
3. The unit will start to time the conversation after 6 seconds.
4. When fi nished, press
SPEAKER key again.
 Pre-dialing function
1. When the handset is on the base, dial the desired number.
2. If there are mistakes, use the
DEL key to edit.
3. Press SPEAKER key or pick up the handset and the number will be dialed
automatically.

Redial
1. Pick up the handset or press SPEAKER key,
2. Press REDIAL key, the last dialed number will be dialed again
 Auto-redial (this function just for your selection)
1. Press SPEAKER key, dial a number, and you hear an engaged tone.
2. Press ARD key and the last dialed number will be redialed automatically at every
9-10 seconds until the line is through.
3. The phone will redial the same number automatically for 32 times.
When there is an incoming call while using auto-redial, pick up the handset or press
SPEAKER key to answer the call. The auto redial function will be terminated.
REVIEWING, CALLING BACK AND DELETING INCOMING NUMBERS
 Reviewing
In on-hook state, press UP or DOWN key to scroll and review the numbers.
 Deleting
When the desired number is shown, press DEL key, the number is deleted. Press and
hold DEL key for 3 seconds, all the incoming numbers are deleted.

Calling back
1. Scroll to the desired number, press SPEAKER key or pick up the handset, and the
number is dialed out, or
2. Press
REDIAL key, LCD displays PICK UP , press SPEAKER key or pick up the
handset, the number is dialed out. Or
3. Press and hold
REDIAL key till PICK UP fl ashing, press SPEAKER key or pick up the
handset, the number is dialed out. If the long distance code is set, the telephone will
add the long distance code ahead the number automatically and then dial back. If
the PABX code is set, the telephone will detect and add the code before the number
automatically when dialing back the number. It will dial the PABX code fi rst and
then after a 2 second pause and then dial the number.
REVENTING FSK MESSAGE TO AUTO-ADJUST REAL TIME
When a FSK message comes, the unit adjusts real time automatically, you can
prevent real time auto adjustment as follows: