background image

●   

Pushing this button cuts off the sound reproduced from the speaker and then 
"           " will be displayed on the screen with red color.

To return the sound, press it again and then "          " will be displayed on the screen
with green color.

●   

With this button, up to 2 hours every 10 minutes can be set to the sleep-timer.

●   

If you press the "SLEEP" button for the first time, " - - - MINUTE" sign of the nonset
sleep-timer appears on the upper left side of the screen.

●   

This display appears for 3 seconds unless any button is pressed.
Whenever pressed again, the setting time is increased by 10 minutes

●   

OSD characters remains on TV screen for the interval of 3 seconds. Then, it will
disappear from the TV screen and set up sleep function mode simultaneously.
On the other hand, if the ENTER button is pressed before the time interval of 3
seconds, the OSD will automatically disappear from TV screen and set itself to sleep
function mode.

●   

When the remaining time become "0", the TV receiver is turned off.

17

In order to change from TV mode to AV mode, press the TV/VIDEO button on the
remote control unit or TV/VIDEO button on the front of the receiver.
At this time, the "VIDEO" is displayed on the upper left side of the screen.

TV/ VIDEO

MUTE

SLEEP

TV

VIDEO

TV

TV/ VIDEO

TV/ VIDEO

VOL

VOL

(VOL ON STATE)

GREEN

RED

MUTE

MUTE

--- MINUTES

10MINUTES                                             120MINUTES

SLEEP

SLEEP

SLEEP

Содержание DTC-1472






















Отзывы: