4
• Clean the device thoroughly after use (see “cleaning and maintenance”).
• Avoid locations subject to vibrations, cold or humidity.
• Do not expose the device to direct sunlight, heat sources, excessive humidity or corrosive environments.
• Do not place the device under any mechanical stress.
• Improper use of the device could damage the product.
• Please handle the device carefully. Impacts or falls, even from a low height, can damage the device.
• Do not open the casing as this may result in electric shock.
• Do not attempt to disassemble or repair the device or modify it in any manner.
• The device must be serviced if it has been damaged in any way, i.e., if the power supply cord/plug is damaged;
objects have fallen into it; it has been exposed to rain or moisture; it has been dropped or does not operate
properly.
• Do not use abrasive cleaning solvents to clean the device.
• Do not use foreign objects to clean the device.
Important information, follow these instructions
• This device can be used by children aged 8 and over and people with restricted physical, sensory or mental
capacity or a lack of experience and expertise, provided they are under supervision or have been given instructions
about safely using the device and are aware of the potential hazards. Children must not play with the device.
Cleaning and maintenance must not be done by children unless they are over the age of 8 and under supervision.
• Only use the device indoors, in dry areas and not in the vicinity of water, other liquids or humidity.
• Do not use the device if it, the cable or power plug has fallen into water or any kind of fluid.
• Never immerse the device, cable and power plug in water or any kind of fluid.
• Do not pick up the device if it has fallen into water or any kind of fluid. Remove the plug from the power socket
immediately. Do not sue the device again.
• Place the device on a flat and stable surface, in a place where it cannot fall over.
•
Caution!
Dispelled water is hot. Do not touch it to avoid burning yourself.
• The device is equipped with an overheating safety feature. This is activated if the temperature becomes too high.
If this is the case, you must let the device cool down before it can be used again. Switch OFF the device and then
remove the plug from the power socket. Allow the device to fully cool down. The device needs approximately 30
minutes to fully cool down.
• Remove the power plug from the power socket if the device is unused for long periods of time.
• When removing the plug from the power socket, pull the plug itself, not the cable.
• Do not operate the device using an external time switch or a separate remote-control systems.
3) INSTALLING AND USING THE DEVICE
Open the packaging carefully before taking out the device. Make sure the device is complete and undamaged.
If any components are missing or damaged, contact the vendor and do not use the product. Retain the packaging
or recycle it in accordance with local regulations.
EN
