25
TO CANCEL SLEEP MODE:
To cancel sleep mode, press the SLEEP button again; the
SLEEP indicator will disappear in the display.
AUTO
TO SET UNIT TO SLEEP MODE
In the cooling operation; When you are going to sleep, select this feature and the unit will cool off the room to the desired tempera-
ture and then increase that temperature throughout the night.
In the heating operation; When you are going to sleep, select this feature and the unit will heat up the room to the desired tempera-
ture and then decrease that temperature throughout the night.
1. Press the ON/OFF button on the re-
mote control to turn the unit on; the On
LED will light on the indoor unit and
“ON” will light in the remote display.
2. Press the MODE button to select the de-
sired mode. Then, set the desired tempera-
ture using the TEMP.
▲
or
▲
buttons.
3. Press the SLEEP button on the remote con-
troller. The unit will then be in the sleep mode
and will cool the room to the desired tempera-
ture. After a while the unit will increase the tem-
perature again. This process will then repeat.
4. Press the “TURBO/MILD” button to select
powerful cooling if this button is selected
one more time, it is become normal power.
TURBO/MILD function is disable in actual
heat operation (for example, heating oper-
ation in the Auto Mode or Heat Mode)
1. Open the indoor unit’s cover and make sure the EMER-
GENCY/REMOTE switch is set to the EMERGENCY position.
3. To turn the unit off, push the EMERGENCY/ REMOTE
switch to the REMOTE position.
2. The unit will then turn on and depending on the room tem-
perature, it will select the cool or dehumidifier, fan speed au-
tomatically.
EMERGENCY OPERATION
If the remote control is lost, broken or has no batteries, follow the procedures below:
EMERGENCY/REMOTE Switch
EMERGENCY/REMOTE Switch
