22
To Delete Channels Manually
■
Follow the procedures below to delete stored channels.
■
You must set the viewing mode for your VCR, choosing either CABLE (cable system connection) or ANTENNA
(antenna connection).
1
1
Press [SETUP] button and select
ÒCHANNEL SETÓ. Select ÒAdd/Remove
ChannelsÓ.
2
2
Select the desired channel and delete it.
ADD/REMOVE CHANNELS
Channel 02
is now REMOVED.
Memorizing TV Channels
Selecting cable or antenna viewing
To set the viewing mode:
From the CHANNEL SET menu, press [
†
] to move the
cursor down to SIGNAL TYPE. Press [ENTER] to toggle
between CABLE and ANTENNA.
When the desired viewing mode is displayed, press
[SETUP] twice to exit.
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type:
CABLE
Channel Change:
CH3
To Set Output Channel
Press [SETUP] button and select ÒCHANNEL
SETÓ. Select ÒChannel ChangeÓ.
By pressing [ENTER] button, set the exclusive channel
for video on the desired one of CH3 or CH4.
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type:
CABLE
Channel Change:
CH3
Press [NUMBER] button of remote control to select the desired channel to delete.
When [
√
] button is pressed, ÒADDEDÓ under the channel number converts into
Ò
REMOVEDÓ
.
3
3
To check the deleted channel, press [CH up/down] button on remote control.
DR-C91/92D1N-BS 04.1.19 9:51 PM ˘
`
22
