45
Additional Information
Additional Information
Troubleshooting
Cause Symptom
Correction
No power
The power is on,
but the DVD player
doesn't work
No sound
No picture
The playback
picture is poor.
The power cord is
disconnected.
No disc in inserted.
The equipment connected
with the audio cable is not set
to receive DVD signal output.
The audio cables are not
connected securely.
The power to the equipment
connected with the audio
cable is turned off.
The digital audio output is
set in the wrong position.
The TV is not set to receive
DVD signal output.
The video cable is not
connected securely.
The disc is dirty.
No disc is inserted.
An unplayable disc is
inserted.
The disc is placed upside down.
The disc is not placed
within the guide.
A menu is on the TV
screen.
The rating level is set.
Plug the power cord into the wall
outlet securely.
Insert a disc. (Check that the DVD or
audio CD indicator in the DVD
display is lit.)
Select the appropriate video input mode
on the TV so the picture from the DVD
player appears on the TV screen.
Connect the audio cable into the jacks
securely.
Turn on the equipment connected
with the audio cable.
Set the Digital Audio Output to the correct
position, and then turn on the DVD player
again by pressing the POWER button.
Select the appropriate video input
mode on the TV so the picture from the
DVD player appears on the TV screen.
Connect the video cable into the jacks
securely.
Switch TV to appropriate mode using the
TV mode button on the remote control.
Check if you have pressed the AUDIO
ONLY button.
Clean the disc.
Insert a disc. (Check that the DVD, or audio
CD indicator in the DVD display is lit.)
Insert a playable disc. (Check that the
DVD, or audio CD indicator in the
DVD display is lit.)
Place the disc with the playback side down.
Insert the disc correctly inside the
guide.
Press the SETUP button to turn off the
menu screen.
Cancel the rating function or change
the rating level.
Содержание DPC3000N
Страница 1: ...DPC3000N ...
