1. INTRODUCTION
Dear Customer, thank you for your trust and for buying our product. Before operating, read all the rules of
this manual. For optimal use read the maximum operating and maintenance instructions thoroughly. For
any problem with maintaining or commissioning, please contact our service shop.
2. DESCRIPTION
Charger device is used for charging the battery voltage of lead-acid car 12/24 volts, and to start the
engine. The user must select the type of battery charger according to the parameters of the battery and
adjust the voltage switch between 12/24 V.
The device is equipped with thermal protection. When the device operates at high current can become hot
and hence may damage the unit. To do this, thermal protection is activated with the overheating of the
unit. The unit will operate with this protection until the temperature returns to normal. The device is equi-
pped with an overload-protection network and surges.
When working with a 12 V battery, check for failures in their work.
If the device is faulty, please check the voltage, it is possible to lower than normal: 4 B. After confirming
the absence of errors, press "MIN" to the load.
Note that this device produces a charge if the battery voltage is not less than 4 volts. When working with
a battery of 24 V, check for failures in their work. Check that the battery voltage match the values specified
in the front of the charger.
3. ELECTRICAL CIRCUIT
4. OUTLINE OF FRONT PANEL
1. Handle
2. Ammeter
3. Indicator overheat protection
4. MIN / MAX switch
5. Switch 12/24
6. Fuse
7. Output Terminal
8. Cable Network
9. Frame
6
