www.daewoopower.bg
7
7
Do not keep the tool directed at one spot too long to prevent igniting the surface.
Avoid collecting paint on the scraper accessory, as it may ignite. If necessary,
carefully remove paint debris from the scraper accessory using a knife.
8.4
Stationary use
This tool can also be used in stationary mode.
Secure the cable to prevent pulling the tool off the workbench.
Carefully switch the tool on.
Make sure that the nozzle always points away from you and any bystanders.
Make sure not to drop anything into the nozzle.
8.5
cooling down
The nozzle and accessory become very hot during use. Let them cool down before attempting to move or
store the tool.
To reduce the cooling time, s
et the on/off switch to position
ĉ
and let it run for a few minutes
.
6ZLWFKWKHWRRORIIDQGOHWLWFRROGRZQIRUDWOHDVWPLQXWHV
9
MAINTENANCE AND CLEANING
Attention! Before performing any work on the equipment, pull the power plug.
9.1
Maintenance
Your Power Tool has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
9.2
Lubrication
Your power tool requires no additional lubrication.
9.3
Cleaning
Keep the ventilation slots clear and regularly clean the housing with a soft cloth.
9.4
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents
may damage the plastic parts.
10 TECHNICAL DATA
Voltage
220-240 V ~ 50HZ
Содержание DAHG2000
Страница 10: ...www daewoopower bg...
