www.daewoopower.bg
4
4
before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with cutting edges are less
likely to stick and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the
manner intended for the particular type of power tool, taking into account the working conditions and
the work to be performed. Use of the power tool for operations different from intended could lead to
a hazardous situation.
4.5
Service
Have your power tool serviced by qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
5
ADDITIONAL SAFETY INSTRUCTIONS FOR HEAT GUNS
Do not place your hand over the air vents or block the vents in any way.
The nozzle and accessories of this tool become extremely hot during use. Let these parts cool down
before touching.
Always switch the tool off before putting it down.
Do not leave the tool unattended while it is switched on.
A fire may arise if the appliance is not used with care.
Heat may be conducted to combustible materials that are out of sight. Do not use in a damp
atmosphere, where flammable gases may be present or near combustible materials.
Allow the tool to cool fully before storing.
Ensure adequate ventilation as toxic fumes may be produced.
Do not use as a hairdryer.
Do not obstruct either the air intake or nozzle outlet, as this may cause excessive heat build up
resulting in damage to the tool.
Do not direct the hot air blast at other people.
Do not touch the metal nozzle as it becomes very hot during use and remains
KRW IRU XS WR
minutes after use.
Do not place the nozzle against anything while using or immediately after use.
Do not poke anything down the nozzle as it could give you an electric shock. Do not look down the
nozzle while the unit is working because of the high temperature being produced.
Do not allow paint to adhere to the nozzle or scraper as it could ignite after some time.
6
REMOVING PAINT
Do not use this tool to remove paint containing lead. The peelings, residue and vapors of paint may
contain lead, which is poisonous. Any pre-
EXLOGLQJPD\KDYHEHHQSDLQWHGLQWKHSDVWZLWK
paint containing lead and covered with additional layers of paint.
Once deposited on surfaces, hand to mouth contact can result in the ingestion of lead.
Exposure even to low levels of lead can cause irreversible damage to the brain and nervous system.
Young and unborn children are particularly vulnerable.
:KHQUHPRYLQJSDLQWHQVXHWKDWWKHZRUNDUHDLVHQFORVHG3UHIHUDEO\ZHDUDGXVWPDVN
Do not burn the paint. Use the
scraper
and keep the nozzle a
WOHDIPPDZD\IURPWKHSDLQWHG
VXUIDFH:KHQZRUNLQJLQDYHUWLFDOGLUHFWLRQZRUNGRZQZDUGVWRSUHYHQWSDLQWIURPIDOOLQJLQWRWKH
tool and burning.
Dispose of all paint debris safely and ensure that the work area is thoroughly cleaned after
completing the work.
Содержание DAHG2000
Страница 10: ...www daewoopower bg...
