10
1. BASIC PARAMETERS
Dear user!
Thank you for purchasing the DAEWOO concrete mixer.
This manual describes the assembly, safety and maintenance procedures and the use of DAEWOO
models of concrete mixers.
All data in the user's guide contains the latest information available at the time of printing.
Note that some of the changes made by the manufacturer, may not be reflected in this manual. In
addition, images and illustrations may differ from the actual product. If you have problems, use the
information found in the back of the manual to get in touch.
Before working with concrete mixer, you must read the entire manual. This will help to avoid you
possible injuries, or damage to the equipment.
You will also find the guarantee, that allows the elimination of manufacturing defects during the
warranty period. You must present the ticket with the date of purchase, store and legible signature of
the seller.
Concrete mixers
DAEWOO DACM 70H / 125H / 140H / 160H / 180H / 200H / 260H
• Read this manual and follow all the instructions and warnings. Use this guide to become familiar
with the concrete mixer , its proper use and safety requirements .
• Keep this manual in a safe place.
2. SPECIFICATIONS
3. APLICATION SCOPE
• The concrete mixer is designed for the preparation of mortars, concrete mixtures, mortar and plaster,
with aggregate size up to 40 mm
• The concrete mixer can be used to mix different dry materials (subject to allowable weight and
volume), as the mix of fertilizer and others alike, and with different reasons than building work activi-
ties .
• Mode of operation: intermittent, operation under the control of the operator.
4. SUPPLY
1.Electric motor - 1 unit
2.Lower drum - 1 unit.
3.Upper drum - 1 unit.
4.The front frame - 3 pieces.
5.Blades - 2 units.
6.Drum tilter - 1 unit.
7.Transport wheels - 2 units.
8.Mounting Set (screws/washers/nuts) -1 set.
5. SAFETY INFORMATION
Please, read carefully the safety rules and follow the instructions. Failure to follow these rules can lead
to serious injuries as a result of an incorrect mechanical action, electric shock or fire.
• For safety reasons, children under 18 and people who are not familiar with these terms, do not have
to use this tool.
Use this product only for the use described in the manual.
If you do not have the skills to work with the product, we strongly recommend you to consult a specia-
list or an experienced user.
The product is not intended for use by persons (including children) with decreased physical, sensory
or mental capabilities, or lack of experience or knowledge, unless they are controlled by a person
responsible for their safety.
Fool people and children should be supervised to prevent them from playing with the tool or around it.
• Take a look at the characteristics and potential risks. Examine the control of the operating system
before you start using it. The operation and maintenance of the mixer, must be done by experts or
people who are familiar with its design and operation. To work with this tool you need to carry out the
above rules and fulfill the “Safety rules against fire”.
The Visual inspection
• Before each use, inspect the device looking for damage, control wrong assemblies and DEFECTUO-
SAS parts, and the integrity of the power cord . Defective units must never be used !
• Avoid dangerous conditions. Ensure the safety of the workplace: it must be clean and ILUMINADO.
Uneven terrain could cause injury.
• Be sure that the working environment doesn’t contain barriers to work, such as dirt, oil, trash and
other items that may lead to the fall of working men or visitors in moving parts.
• Do not move the device during operation of the mechanism!
•This equipment was designed for the manufacture of concrete, mortar and plaster.
•Do not mix any flammable and / or explosive products with it!
•Do not use the machine near paint fumes, solvents or other flammable substances.
•Respect the power cord. Never move the mixer on the cable. This can cause it to break and generate
a dangerous system malfunction.
•Do not expose the cable to heat or sharp objects.
•The optional cable: The extension must not exceed 50 meters. The cable should be at least 1.5 mm2
for voltage of 220V. Not respecting the technical guidance prescribed can cause engine overheating
and damage.
•Do not tie the power supply plug.
•Avoid injury from unexpected accidents. Keep hands at a safe distance from the moving parts of the
mechanism.
•Do not place tools in the machine and avoid contact of any part of the body with the drum during
work operations.
• During operation, do not try to clean the space between the frame and the support or the drum and
the support.
• Never exceed the allowed loads. Follow the technique of working with the mixing board. The opera-
tion of the mixer should be trimmed. That is, for every hour of work is necessary to give 25 % of the
time for relaxing and cooling. Continuous inclusions should not exceed 5 minutes.
• Do not operate the engine at full battery overloaded. Engine failure due to overloading battery is an
exception to the rules of warranty!
The mixer is double insulated. This means that all external metal parts are electrically isolated from the
mechanical parts. This is achieved by placing insulation between the electrical and mechanical parts.
CAUTION!
The double insulation does not substitute the usual precautions when using the tool. This insulation
system is an additional protection against accidents due to potential damage of the inner electrical
insulation of the tool.
CAUTION!
Wait until it stops completely, parts of the instrument could be moving by inertia after turning it off, do
not try to stop them with your hands!
• Do not overload the tool. It works safely and reliably.
• Subject to the parameters specified in its technical features, work intermittently to avoid overheating
the tool.
• Ensure that the ventilation holes (slots) in the motor housing are always open and clean.
• Do not open the engine when it is running and turn it off in work breaks.
Way of working.
• Do not wear loose clothing, ties or jewelry (rings, watches, etc.) in order to avoid them to fall into the
moving parts of the machine. We recommend the use of non-conductive gloves and shoes. Use
protective helmets. Use a mask or respirator when working with dust - raising materials. Always wear
safety glasses.
• Be alert. It is illegal to use the tool under the influence of alcohol or drugs that may affect your
reaction speed.
• Do not operate the mixer when you are tired or if you do not have the control of the workflow.
• Treat the concrete mixer carefully. After each work, the mixer should be cleaned from the remnants
of the mixture. Otherwise, the drum will be damaged.
To clean it, turn the blender, pour into the drum of 10-20 liters of clean water and add some gravel.
Run the mixer for about a minute. Turn it off and drain the dirty water and gravel. Clean the blade with
a brush.
• Storage. Keep the mixer in a warm, dry place out of the reach of children.
At the end of the life of the instrument it must be disposed of in accordance with the rules, regulations
and procedures in the location where you are using the device
7. STRUCTURE AND COMPONENTS.
1. Wheel to tilt the drum.
2. Crown
3. Drum, upper feeding entrance.
4. Blade.
5. Motor housing.
6. Switch button.
7. Front wheels frame.
8. Wheel.
9. Beam.
10. Tilt drum locking pedal.
11. Support.
12. Lower drum.
13. Angle of the brake discs.
WARNING! Product appearance may vary slightly from that shown in the Fig. This is due to new
technical developments. We reserve the right to make changes to the tool without previous notice in
8. TOOL ASSEMBLY.
MONTAGE
CAUTION!
It is highly recommended to work with an assistant in the assembly of the concrete mixer!
Shelf
• Pull the wheel axle located on each side of the wheel.
• Set with the keys caps
• To the beams you must connect an additional support. Insert it inside the spring pedal.
• Secure the connection screws (M8h70 and M6h25). Tighten the screws.
•Connect the frame with the wheel frame. Fix its position with the screws (M8h70). Tighten the screws.
Lower drum
• Set the drum’s rotational arc of reference under the beam. Secure the position with screws (M8hb5)
• Carefully place the lower balance of Raban in the frame, so that the bearings are aligned.
•Align each side
•Tighten the bolts with a wrench
Blades
• Place the blade in the lower drum mixers, ensuring their position at the bottom of the M10x20 bolts.
• Place the upper drum.
CAUTION!
The arrows on both drums are used for the correct installation of the upper drum on the bottom. If you
have any problem with the installation, set the upper drum in the bottom and turn until the arrows line up.
• Place the upper drum (3) at the edge of the lower drum (12), and secure the slots and arrows, as well
as free rotation of the blades and the drum interior.
Fix to its position the superior half of the drum with the use of all the ten provided M8x16 bolts,
common and grove washers and nuts. Align the holes on the edge adjusting the screws correctly.
Ensure the reliability of the attachments.
• Among the blades and the drum must be a joint, a washer, an elastic ring and a nut.
• Place the blade to the upper drum of Bani, linking them to the outside with two M8x16 screws
threaded through holes in the drum body.
• Ensure that the upper and lower blades are fixed.
• Make sure all screws are tight.
Steering wheel for the drum tilting.
• Adjust the steering wheel to position (1) in the mounting location.
• Place the disc lock on the shaft end of the grid legs. Clip design M8h20 Grover with two screws for
each bolt, a washer and a nut.
9. LOADING THE MIXER.
CAUTION!
Before loading the feeding mixture, be sure to turn on the mixer. Downloading the mixer only should
be done by the rotation of the drum!
CAUTION!
Do not load all the starting material at once, to prevent sticking to the walls of the drum. Load the
drum slowly!
To turn the mixer ON:
1. Connect the power cord of the mixer to the power supply.
2. Press the green button on the side of the electric motor (mounted on the wall).
3. To turn OFF, press the red button (6).
OPERATION
CAUTION!
The electric engine is equipped with an automatic thermal protection against overheating.
• The mixer is automatically reset after the engine cooling.
• A thermal protection is not warrant of 100 % prevention for any engine failure. This system performs
the function of protection indicator. When the alarm system is activated, to protect the mixer, the
operator must take appropriate action to eliminate the cause of the problem (Measures: to reduce the
load, allow time for cooling, improve engine cooling).
For the best results, you should observe the startup sequence:
1. Add the desired amount of gravel into the drum.
2. Add the appropriate amount of cement in the drum.
3. Add the planned amount of sand in the drum.
4. Add all the water required in the drum.
Requirements for the starting material :
CAUTION!
Do not overload the mixer and fill the drum with the mixture no more than 3/4 of its volume!
• Source - sand should have a grain size of 0.1 to 5 mm.
• Aggregates as crushed stone, gravel and others alike, should have a grain size of 5-40 mm.
Use a quality gypsum cement mixture. To improve the cement material, mortar and concrete mixtures,
a variety of special additives can be used (appropriated quality gypsum cement, pumice, defoamers
and others alike).
For the hardener is recommended clean tap water.
As a general rule, the preparation of mortar from the load takes between 60 and 270 seconds.
10. UNLOADING THE MIXER
CAUTION!
Do not turn the key to the highest for prepared mixture. Use only the tilt mechanism of the drum!
CAUTION!
Do not turn off the mixer with a loaded drum. Unloading must be carried out by the rotation of the
drum!
11. CLEANIG THE DRUM.
CAUTION!
• Clean the mixer immediately after use.
• The drum should be kept very clean.
• After the operation of the mixer, in the inside wall of the drum, it always remain adhered concrete or
lime. Even a small amount of the lump, therefore, will accumulate the raw material and increase with
each subsequent use of the mixer, which may reduce its useful volume, increase the weight of the
drum and create additional stress on the motor.
• Never throw bricks inside the drum to take off these deposits.
• Do not use tools such as a hammer to knock the plate. Do not subject the machine to shock loading!
• Adhered cured cement must be carefully scrapped off the walls of the drum.
12. OPERATION.
CAUTION!
• Immediately after the operation, and the discharging of the mixture from the mixer, the drum needs
to be rinsed with gravel and water in a few minutes, to remove all the remnants of the solution.
• Turn the mixer, pour into the drum from 10 to 20 liters of clean water, add some gravel. Run the mixer
for several minutes. Turn off and empty the dirty water and gravel.
• Shut down the feeding opening to drain and dry the drum
• Clean the blades with a brush.
• Do not use harsh chemicals (acids, etc.), which may react with the parts of the plastic housing.
• Do not spill liquid inside the control unit, do not immerse the unit or part thereof in liquid, do not
wash it with tap water!
• Clean the unit with a damp cloth.
• Dry and clean the outer parts of the mixer.
4. 5. The inclination of the drum
• The slope and position of the drum is fixed with the handle (1) on the side of the mixer.
• The drum is fixed in position by means of special pins entering in holes of the locking tilt disc.
• To put the barrel in a fixed position, tighten the handle itself and turn to the desired angle. To change
the angle of the drum (model iOASM 260N) press the pedal (10) and turn the drum’s tilt wheel (1) to the
desired angle. For fixing the drum in position, release the pedal.
The position of the drum:
For
Mortar:
For
Concrete:
For the Discharge of premixed:
For Storage:
Periodic servicing
• The safety and durability of the concrete mixer depends on the proper use and maintenance.
• Observe the normal load of the mixer.
• Do not exceed its operating cycle. The operation of the mixer should be trimmed. That is, for every
hour of work is required to give 25% of the time for rest and cooling. Continuous inclusions should not
exceed 5 minutes.
• Clean the mixer regularly. Especially at the end of its work.
• After each use, clean the drum balance.
CAUTION!
• It is strictly forbidden to grease the drum’s "gear-toothed rim", which leads to premature attrition.
• Do not lubricate the drum’s "gear - toothed rim" because the presence of thick and viscous grease
in the crown accumulates dirt, dust and sand.
CAUTION!
• Gear rotation of the drum is a consumable part. Worn gear is considered a mechanical damage and
is not subject to warranty!
• Check the belt tension.
• Periodically lubricate disc brakes and the drum inclination. For lubrication using “gear lubricant
thickness” is recommended.
• The repair of the mixer must be done only in an authorized service center!
Transport and storage conditions.
• The tool manufacturer packaging can be carried by all types of covered transport, at temperatures of
-10 to + 40°C and a relative humidity of up to 85% (at + 25°C).
• During the transportation, make sure the gasket is perfectly fixed, cause any movement inside the
vehicle could damage the tool.
• The appliance must be stored in a ventilated, heated place, out of reach of children, out of direct
sunlight, 5 to + 35° C and a relative humidity of 85% (at + 25°C).
• At the end of the life of the instrument it must be disposed of in accordance with the rules, regula-
tions and current procedures in the place of household appliances trading.
