8. Rinse Aid Indicator
When the rinse aid level is low, the
rinse aid indicator will turn on. In
this case, you will need to fill the
rinse aid compartment.
9. Salt Indicator
If there is not enough salt in the
machine, the salt indicator will turn
on. In this case, you will need to fill
the salt compartment.
10. Tablet Option Indicator
Select the Tablet Detergent option
when using all-in-one detergents
that contain salt, rinse aid and extra
functions.
11. Extra Hygiene Option
Indicator
You can select the Extra Hygiene
option if you want to change the
water temperature and washing
time of the selected program to
ensure a more hygienic washing
cycle.
12. Half Load Option Indicators
You can select the Half Load
option to wash your dishes in
three different ways, namely both
baskets, upper basket only and
lower basket only. Ideal for small
loads, these options ensure less
consumption during the washing
cycle.
13. Energy Save Indicator
Select the Energy Save option to
enable the door of the machine to
open at the end of the programme
to increase drying efficiency. This
function also saves energy by
operating at a lower temperature.
The Energy Save Indicator will
illuminate.
14. Extra Fast Indicator
Select the Extra Fast function
to decrease the duration of a
programme, providing more
economical water usage. The Extra
Fast Indicator will illuminate.
15. Extra Silent Indicator
Select the Extra Silent function for
a more sensitive and silent washing
operation. The Extra Silent Indicator
will illuminate. This option reduces
the sound pressure level of the
washing
NOTE:
If you have used one of
the extra options in the last washing
program, this option will be enabled
in the newly selected program
until the machine is switched off.
To cancel this option in the newly
selected program, press the Option
key (6) until its light goes off.
16. Washing Step Progress
Indicator
Washing, Rinsing, Drying and End
symbols of the running program will
be shown on the display alternately.
While the drying symbol is on, the
product will be silent for 15 to 100
minutes according to the selected
program.
17. Wi-Fi Connection Indicator
To switch your machine into
wireless network searching mode,
press and hold the Delay (3) and
Confirm (7) keys at the same time
for 3 seconds. When the network
searching mode is enabled, the
Wi-Fi Connection indicator will
flash. When the Wi-Fi setup is
established, the Wi-Fi connection
indicator will remain on.
18. Remote Access Indicator
When the Wi-Fi setup is complete,
you can press and hold the
EN - 2
2
