6. FUNCTIONS OF THE CONTROL PANEL
19
FUNCTIONS OF THE CONTROL PANEL
Program selector
For switching the washing machine on and off and
for selecting the program.
Can be rotated in both direction.
Even if the program selector rotates while the
program is running, the program is not changed
(except for off
) .
(All program is electronically controlled by PCB)
Indicator light
The respective indicator lights up, when the
required program segment runs.
Time delay
To pre-engage time for washing.
As the button is pressed, the delayed time is
repeated as following;
2hours
➝
3hours
➝
4hours
➝
• • •
➝
10hours
➝
11hours
➝
max 12hours
This option is enabled with COTTON,
SYNTHETIC, Speed Wash, Intensive, Sports
wear, Rinse+Spin and Baby care programs.
Button for options
(in addition to the program if required)
Intensive wash
Extended washing time.
Rinse +
Extra rinse cycle.
Rinse Hold
No final spin cycle
• The indicator lamp of the buttons lights up if
options are active.
• Canceling options : Press button again.
Start/Hold button
For starting the washing cycle.
(program must have been selected)
Note
The washing time may vary by the amount of laundry, water pressure, water temperature and other
washing conditions. If an unbalanced load is detected or if subs removing program operate, the
washing time maybe extended. (Maximum increasing time is about 1 hour.)
By turning right the Program Selector, the program is selected in order of
COTTON COLD
➝
COTTON 40°C
➝
COTTON 60°C
➝
COTTON 60°C/Pre
➝
COTTON 95°C
➝
SYNTHETIC
➝
Baby care
➝
Speed Wash
➝
Wool Cold
➝
Wool 30°C
➝
Sprots wear
➝
Tub Clean
➝
Rinse+Spin
➝
Spin
➝
Drain
➝
OFF
➝
COTTON COLD
➝
COTTON 40°C
Spin selector
You can select the spin programs(Spin 400rpm,
600rpm, 800rpm, 1000rpm) by pressing the
Program selector.
400rpm of spin velocity is selected automatically
with WOOL/WOOL 30°C program in order to
protect damage on laundry.
800rpm of spin velocity is selected automatically
with COTTON / SYNTHETIC / Baby care /
Speed Wash / Tub Clean / Sportswear / Spin /
Rinse+Spin programs.
*Warning : If value of unbalance is extremely high,
spin speed can't reached that r.p.m of
selected by spin selector.
Содержание D-NT1011
Страница 16: ...15 EXPLODE VIEW AND PARTS LIST TUB AS...
Страница 18: ...17 EXPLODE VIEW AND PARTS LIST CABINET AS...