10
Bladeless Fan & Heater
Model: COL1550
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
•
If the battery compartment does not close securely, stop using the product and
keep away from children.
•
If you think batteries may have been swallowed or placed inside any part of the
body, seek immediate medical attention.
Safety Tip
–
Over
WARNING!
This appliance is fitted with a built in safety tip-over switch, if the
appliance is tilted by 30° or more the cut-out is activated and the unit will stop
working. The
Display
(8) will show the following fault code “
E3
”.
Place the heater to
the upright position and the unit will begin to operate normally.
Safety Cut
–
Out (Overheat Protection)
WARNING!
This appliance is fitted with a built in safety cut-out, that will activate
when the ambient temperature reaches 35°C or above. If the cut-out is activated
the unit will automatically stops working and go into standby until the ambient
temperature has dropped to below 35°C.
Care and Use of your Fan
•
Ensure that the fan is not connected to the mains supply before cleaning and if
using heat mode allow to cool.
•
Wipe the fan body clean with a clean, soft damp cloth.
•
Do not use harsh detergents or abrasives to clean.
•
Do not use polishes to clean.
•
Do not immerse the fan or its cord in water or any other liquid.
•
To prevent dust build-up it is recommended to periodically clean both the
Air
Inlet
(3) and
Air Outlet
(1), use a soft bristle brush.
