8
Bladeless Fan & Heater
Model: COL1550
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Heat Mode
•
Place the fan & heater on a solid, dry, heat resistant surface.
•
Insert the
Mains Plug
(6) into a socket and switch the socket on (if applicable).
•
Touch the
Power On/Off Button
(12) or press the corresponding
button on the
Remote Control
(7)
–
arrowed right, to power up
the fan.
•
Touch the
Heat Button
(9) to switch on heat mode.
•
Repeatedly touch the
Heat Button
(9) to select from:
H1
for Low Heat mode
H2
for Medium Heat mode
H3
for High Heat mode
•
Alternatively, if using the
Remote Control
(7), press the
‘
COOL/HOT
’
button for heat mode.
Select the desired heat settings on the
Remote Control
(7) by pressing the
‘
H
’
(High Heat),
‘
M
’
(Medium Heat) or
‘
L
’
(Low Heat) buttons, arrowed right:
H1
for Low Heat mode
H2
for Medium Heat mode
H3
for High Heat mode
WARNING!
The surface of the unit will become hot in heat mode, particularly
around the
Air Outlet
(1). Allow the unit to cool before cleaning.
Switching off
Touch the
Power Button
(1) on the unit either the
Control Panel
(4) or the corresponding button on the
Remote Control
(7).
Timer Operation
Whilst the unit is operating, press the or button on the
Remote Control
(7) until the desired time the unit is to be on
for is shown on the
Display
(8).
The timer can be set in hour increments up to 9 hours.
The fan & heater will automatically go into standby mode if left inactive for 20
minutes.
