background image

35

PART 9

TROUBLESHOOTING GUIDE

Save time and money! Review the charts on the following pages first and you may not need to call for service.

Question

• Is the dryer plugged in?

• Is the fuse blown, or is the

circuit breaker tripped?

What to Do

Confirm that the dryer’s plug is securely and completely pushed into the
laundry room’s power outlet.

Check your home’s or laundry room’s fuse box/circuit breaker box and replace
the fuse or reset the circuit breaker. 
(IMPORTANT: electric dryers generally use two fuses or breakers.)

1. Problem: My Dryer Won’t Start

Question

H1

H2

H5

H3(GAS TYPE)

H7(GAS TYPE)

H8(GAS TYPE)

What to Do

Humidity sensor error. Power off and restart.

Temperature sensor error. Power off and restart.

Heater temperature control problem. Call our Customer Care Center.

Flame detector problem. Call our Customer Care Center.

Gas valve or gas blocked problem. Check your gas supply and the connection
of gas hoses and valves.

Igniter or Flame Detector problem.  Call our Customer Care Center.

4. Problem: My Dryer Displayed An Error Code.

Question

• Is the fuse blown, or is the

circuit breaker tripped?

• Is the gas supply or service

blocked or off?

What to Do

If the fuse is blown or the circuit breaker tripped, the dryer might tumble but not
heat. Check your home’s or laundry room’s fuse box/circuit breaker box and
replace the fuse or reset the circuit breaker. 
(IMPORTANT: electric dryers generally use two fuses or breakers.)

Confirm that the house gas shutoff and the dryer gas shutoff are both fully
open.

2. Problem: My Dryer Doesn’t Heat

Question

• Did you follow the instructions

on your fabric softener product?

• Are you drying clean and dirty

clothes together?

• Were your clothes entirely

clean?

What to Do

Confirm and follow the instructions provided with your fabric softener product.

Make sure to use your dryer to dry only clean items, because dirty items can
soil clean clothes placed in the same load or later placed in the dryer drum.

Stains on dried clothes are actually stains that weren’t cleansed during the
washing process. Please review and confirm that you are following your
washing instructions and that the clothes are being completely cleaned.

3. Problem: There Are Greasy Spots On My Clothes.

Содержание DWR-WE3011WW DWR-WE3011RR DWR-WG3011WW DWR-WG3011RR DWR-WE31WW






































Отзывы: