DAELIM Roadwin 250R Fi, Руководство пользователя

Страница: 47 / 68

45
●
If the fuse immediately becomes severed
after being changed with the new one,
check another problem of the electric
system. Contact to Daelim service center.
<DISASSEMBLY> <ASSEMBLY>
EDCBA
Fuse A
30A
Charging, combi S/W,
regulator, ECU
Fuse B
15A
Winker relay, meter
lighting, horn, headlight
(LO/HI), front/rear stop
switch, taillight, fuel meter
heater control, water meter
Fuse C
15A
Ignition coil
O2 Sensor, Stater
Fuse D
15A
Fuel pump, ECU
Fuse E
15A
Fan motor
<NORMAL> <DISCONNECT>
●
Do not use screw driver or other metal
parts to remove the fuse, as short circuit
can be occurred to cause damage to
electric system.
●
Do not usea fuse having a larger
voltage, as the wire can become
overheated and damaged.
●
When replacing any of the electrical
parts (lights and gauges), be sure to
replace them with the recommended
parts. Using different parts can lead to
the fuses burning out or damage to the
battery.
●
When washing the vehicle, take special
care not to allow to be splashed in the
area of the fuses.