DAELIM HISTORY 125 - SERVICE, Руководство по обслуживанию

Страница: 67 / 208

7-1
7. LH. CRANKCASE COVER/KICK STARTER
/CONTINUOUSLY VARIABLE TRANSMISSION
SERVICE INFORMATION
GENERAL SAFETY
●
Do not allow oil to contact the drive belt or the pulley face. The transmission rate of driving force is reduced with oil
contact.
●
Do not operate starter motor while the LH. crank case cover is removed.
NOTE
·
Take precautions not to apply the grease oil to the movable drive face or weight roller.
SPECIFICATIONS
7
SERVICE INFORMATION
· ·· ·· ·
7-1
TROUBLESHOOTING
· ·· ·· ·· ·
7-1
LH. CRANKCASE COVER
· ·· ·
7-2
KICK STARTER
· ·· ·· ·· ·· ·· ·· ·
7-3
ITEM STANDARD SERVICE LIMIT
MOVABLE DRIVE FACE BUSHING INNER DIAMETER 24.000-24.013mm 24.05mm
DRIVE FACE BOSS OUTER DIAMETER 23.980-23.993mm 23.96mm
DRIVE BELT WIDTH 22mm 20.50mm
WEIGHT ROLLER OUTER DIAMETER 19.95-20.02mm 19.50mm
CLUTCH OUTER INNER DIAMETER 120.0-120.2mm 120.50mm
DRIVEN FACE SPRING PLAY 97.85mm 90.00mm
DRIVEN FACE OUTER DIAMETER 37.965-37.985mm 37.94mm
DRIVEN FACE INNER DIAMETER 38.000-38.025mm 38.06mm
TROUBLESHOOTING
Engine starts but motorcycle does not work.
●
Drive belt worn.
●
Ramp plate damaged.
●
Clutch shoe worn or damaged.
●
Movable driven face spring cut.
Engine stops, or the vehicle runs suddenly,
after starting.
●
Clutch shoe spring cut.
Vehicle unable to run at the maximum speed,
or lack of output
●
Drive belt worn.
●
Defective movable driven face spring.
●
Weight roller worn.
●
Pulley face contaminated.
DRIVE BELT
· ·· ·· ·· ·· ·· ·· ·· ·
7-6
MOVABLE DRIVE FACE
· ·· ·· ·
7-8
CLUTCH/DRIVEN PULLEY
· ·· ·
7-11