DAELIM HISTORY 125 - SERVICE, Руководство по обслуживанию

Страница: 133 / 208

12-3
FRONT WHEEL/FRONT FORK/STEERING
FRONT HANDLE COVER
MASTER CYLINDER
SPEEDOMETER
CABLE
WINKER
RELAY
SETTING
BOLT
SETTING
BOLT
HANDLE SETTING COLLAR
FLANGE BOLT
HANDLE
SETTING U-NUT
STEERING HANDLE
REMOVAL
●
Remove the following parts.
-Back mirror
-Front cover
(
⇨
4-3 )
-Wind screen
(
⇨
4-10 )
-Front handle cover
(
⇨
4-10 )
-Remove the speedometer cable from the speedometer.
-Rear handle cover
(
⇨
4-10 )
●
Loosen the front master cylinder holder bolts, remove
the front master cylinder.
●
Loosen the rear master cylinder holder bolts, remove
the rear master cylinder.
●
Loosen the throttle housing fixing screw, remove the
upper / under housing.
●
Remove the throttle cable from the RH. grip, and
remove the RH. grip from the handlebar.
●
Remove the winker relay from the steering handle.
●
Remove the front top cover.
●
Remove the front / rear brake hose, speedometer cable,
throttle cable from the handle cable guide.
●
Loosen the handle setting U-nut, remove the handle
setting collar and flange bolt.
●
Remove the steering handle from the steering stem.
CAUTION
·
When removing the rear handle cover, removal must
be performed with the rear handle cover and the
speedometer installed.
·
Support master cylinder properly to prevent brake
fluid from leaking.
·
If the master cylinder is dropped upside down, air
may enter the hydraulic system. Fix it to the vehicle
while maintaining the correct assembled location.
INSTALLATION
●
Install the steering handle to the steering stem.
●
Install the handle setting flange bolt, U-nut, handle
setting collar.
TORQUE VALUE : 5.5~6.5 kgf
·
m