DAELIM DAYSTAR VL125E, Руководство по обслуживанию

Страница: 153 / 253

11-6
Crank Case / Transmission / Crankshaft
Inspection
Install the crank shaft into the stand or V-block
and measure the vibration of journal part.
Service Limit:Right: 0.1mm(0.004in)
Left: 0.1mm(0.004in)
Measure the side gap of connecting rod end
and crank weight.
Service Limit: 0.6mm(0.02in)
Crankshaft Disassembly
Disassemble the transmission.
Remove the crankshaft from the left crankcase
using a crankshaft separating tool. Remove the
remaining bearings in the left crankcase with a
driver handle and outer driver.
Tools:
Driver
Attachment 42
47mm
Remove the remaining bearings in the
crankshaft with a bearing puller.
Tool: Universal bearing puller
If the crankshaft is removed from the left
crankcase, a new left crankshaft bearing must
be used.
NOTE
Right Left
Crankshaft
Crankshaft Crankshaft
Crankshaft
Crankshaft Crankshaft Crankshaft Crankshaft
Crankshaft
Crankshaft Crankshaft
Crankshaft
Crankshaft
Universal Bearing puller
Universal Bearing puller
Universal Bearing puller
Universal Bearing puller Universal Bearing puller
Universal Bearing puller Universal Bearing puller
Universal Bearing puller Universal Bearing puller
Universal Bearing puller
Universal Bearing puller Universal Bearing puller
Universal Bearing puller
70mm
(2.76in)
80mm
(3.15in)