Daedong CK3520, Руководство пользователя

Страница: 158 / 236

6
-
ck3520 / ck4020 / ck4220
H11O682A
1. consult your local kIOTI dealer for
selection of the universal joint.
2. when selecting a universal joint,
make sure that it is not too short to
come off of the female and male
shafts at the highest position or too
long to impact its female and mail
shafts at the lowest position.
3. move the joint back and forth to
check that its lock pin is properly
seated to the groove of the pto
shaft.
(1) universal joint
INsTALLINg PTO sHAfT PRECAuTIONs wHEN usINg THE PTO
use in rice fields: when using the
tractor in rice fields, where the water
level could rise above the height of
the pto shaft, ask your dealer for
instructions on all necessary water-
proofing and sealing measures. if
such measures are not taken, the
guarantee could be rendered invalid.
when using the PTO drive with
a stationary tractor, ALwAYs
make sure that the gears are
in neutral and that the parking
brake is applied.
Before starting up any PTO-
driven implement hitched to
the three-point linkage, lift the
implement to its full height
and check that at least 1/4 of
the total length of the tele-
scopic section of the drive
shaft is engaged.
•
•
wARNINg
To avoid accidents, always
make sure that all PTO guards
are in position and stay well
clear of the driveline when us-
ing the PTO.
Always disengage the PTO
and stop the engine before
connecting, disconnecting or
adjusting implements that are
connected to it.
Before driving an implement
through the PTO, ALwAYs
make sure that all bystanders
are well sway from the tractor.
•
•
•
wARNINg
TC220-영문-유럽,호주향-OM-06.indd 8 2018-01-05 오후 5:56:22