Daedong CK3520, Руководство пользователя

Страница: 148 / 236

5
-
ck3520 / ck4020 / ck4220
CAUTION
The implement may shake up
and down as the draft sensor
is under impact when the trac-
tor is passing over irregular
ground with the middle or low-
est top link hole selected. In
this case, put the draft control
lever to the “Deep” position
to decrease the sensitivity of
the draft function or select the
highest top link hole.
If the tractor has been stored
for a long period of time or
the transmission fluid is just
changed, abnormal noise may
be heard and the hydraulic
lifting arm may be inoperable
temporarily. In this case, let the
engine idle for 3 to 4 minutes.
•
•
REmOTE HyDRAUlICs
DOUblE ACTING lEvER (If EqUIPPED)
this product is equipped with two
double acting valves (self-return
type) to supply hydraulic power to
the outside. Use them properly ac-
cording to an implement's specifica -
tions.
• For the self-return type double act-
ing lever, it returns to its neutral
position to block the hydraulic fluid
when it is pushed/pulled and then
released. therefore, this type of
double acting valve lever should be
coupler Size
port a, B, c, d pt 1 / 2
lever 1 Push Pull
valve
1
port
a out in
B in out
lever 2 Push Pull
valve
2
port
c out in
d in out
pressure returning
(1) double acting valve 1, lever 1
(2) double acting valve 2, lever 2
(a) port a (c) port c
(B) port B (d) port d
t22O502A
TC220-영문-유럽,호주향-OM-05.indd 26 2018-02-07 오후 1:09:51