Daedong CK2610CHSE Скачать руководство пользователя страница 79

Страница: 79 / 246

function description and operating tips

never use the cruise control

function on a public or bumpy

road or during turning.

apply the left and right brake

pedals before activating the

cruise control function.

•

warning

(1) pto switch

PRESSING

TURNS

PRESSING

TURNS

t22O407a

pto switch (on / oFF)

the pto switch is used to supply

power from the tractor to the imple-

ment.
Make sure to put this switch into the

“off” position before starting the en-

gine. otherwise, the engine cannot

be started.
the rear pto rotates at 540 rpm

when the engine speed is approx.

2,400 rpm.
to activate the pto, press and turn

the switch clockwise. to deactivate it,

press the switch once.

caution

to avoid personal injury and ac-

cident:

before disassembling or

cleaning the pto system,

make sure that the pto switch

is in the “oFF” position, the

engine is stopped, and all

parts are stopped.
always keep the pto driving

part clean. also, check the

pto cover is closed while pto

is in operation.
disengage the pto while driv-

ing the tractor on the public

road.
be careful not to get your

hand, foot, cloth, or hair into

any driving part while the pto

is in operation. you can be se-

verely injured.

make sure that no one is around

the tractor and implement while

the pto is in operation.

•

TC220-영문-수출향(법인향)-OM-04.indd 11

2020-12-10 오전 10:45:33

Содержание CK2610CHSE























































































































































































































































Результаты поиска

Содержание CK2610CHSE

Отзывы:

Похожие инструкции для CK2610CHSE

Бренды по названию

Популярные бренды

Daedong CK2610CHSE, Руководство пользователя

Результаты поиска

Содержание CK2610CHSE

Отзывы:

Похожие инструкции для CK2610CHSE

Бренды по названию

Популярные бренды