Daedong CK2610CHSE Скачать руководство пользователя страница 23

Страница: 23 / 246

for safe operation

9. check for correct coupling be-

tween tow hook and trailer. see

the towing attachments chapter.

10. use ballast weight as recom-

mended. never add more ballast

to compensate a higher load than

allowed. reduce load for safety.

h11o682a

11. a safety chain will help control

drawn equipment should it be

accidentally separated from the

draw-bar while transporting. using

the proper adaptor parts, attach

the chain to the tractor draw-bar

support or other specified anchor

locations. provide only enough

slack in the chain to permit turn-

ing. see your dealer for a chain

with a strength rating equal to, or

greater than the gross weight of

the towed equipment.

7. improper use of the draw-bar, even

if correctly positioned, can cause a

rear overturn.

8. do not overload an attachment

or towed equipment. use proper

counterweights to maintain tractor

stability. hitch heavy loads to the

draw-bar only.

m55o117a

TC220-BOBCAT-OM-01.indd 11

2020-02-20 오후 2:49:05

Содержание CK2610CHSE























































































































































































































































Результаты поиска

Содержание CK2610CHSE

Отзывы:

Daedong CK2610CHSE, Руководство пользователя, Страница: 23 / 246

Результаты поиска

Содержание CK2610CHSE

Отзывы: