Daedong CK2610CHSE Скачать руководство пользователя страница 200

Страница: 200 / 246

ck2610chse / ck3510(h,c,ch)se / ck4010(h,c,ch)se

1. if the clutch does not operate

properly due to its excessive play,

adjust its play regularly.

2. to adjust the free play, unscrew its

lock nut and adjust the clutch rod.

3. after setting the play properly,

tighten the lock nut firmly.

Proper clutch pedal free play (A)

0.8 ~ 1.2 in. (20 - 30 mm)

FUEl FIlTER (s)

REMOVING WATER FROM FUEl

FIlTER

1. water and dust in fuel are accumu-

lated in the filter. Remove the plug

from the bottom of the fuel filter to

drain any impurities.

2. after draining, tighten the plug with

a hand. (Do not use a tool.)

3. start the engine and check for fuel

leakage.

REPlACING FUEl FIlTER

1. Wipe the surface of the fuel filter

clean.

2. unscrew the plug on the bottom of

the fuel filter to drain fuel.

3. Remove the fuel filter.

4. remove foreign materials, such

as dirt, thoroughly and replace the

fuel filter with a new one.

(1) fuel filter

(2) Drain Plug

tC2O710B

TC220-영문-수출향(법인향)-OM-07.indd 24

2020-01-23 오전 9:19:23

Содержание CK2610CHSE























































































































































































































































Результаты поиска

Содержание CK2610CHSE

Отзывы:

Похожие инструкции для CK2610CHSE

Бренды по названию

Популярные бренды

Daedong CK2610CHSE, Руководство пользователя

Результаты поиска

Содержание CK2610CHSE

Отзывы:

Похожие инструкции для CK2610CHSE

Бренды по названию

Популярные бренды