Daedalus Starling V3FP, Руководство пользователя

Страница: 4 / 24

2
To do so, check the pinion pulley (the groove that holds your drive
band) on the front of the motor. It should be located directly below
the belt groove on the flyer above. Verify that the drive belt is parallel
to the front frame by observing it from the side. Use your thumbs
to adjust the position of the motor mount as necessary. If the motor
mount feels too tight to move, push one side downward until it pops
off the carbon tube.
If necessary, this wheel can be flat-packed to aid in portability. To
disassemble, you’ll need to use the 3mm Allen wrench included
in your spares tool kit. Simply remove the flyer, pop off the motor
mount, and loosen 4 screws to separate the front and rear pieces from
the body tubes.
To see all our videos on how to use your wheel scan this QR Code with
your mobile device: