Daedalus Starling V3FP, Руководство пользователя

Страница: 16 / 24

14
When it’s time to change your bobbin, simply slip off the tension belt,
lift the rear end of the flyer and rotate the assembly to either side.
The maiden pivots freely, so the drive belt almost never needs to be
removed. Keep track of the small rear bearing by placing it back onto
the rear magnets until you can get the new bobbin installed. With the
new bobbin on the flyer shaft, replace the rear bearing and rotate the
assembly back onto the chassis, making sure the small rear bearing
goes back onto the magnets. Replace the tension belt and you are
ready to spin again!
When set up for Irish tension, your drive belt is on the bobbin , so
simply slip that off before removing the bobbin.
Changing the Bobbin