Daedalus Starling V3FP, Руководство пользователя

Страница: 13 / 24

11
• The module should light up and show the current set speed.
Adjust this as necessary using the Up/Down arrows, and then
press the Daedalus logo (Start/Stop) on the Speed Controller.
The display will show “- - -“, which is stopped.
• Attach your fiber to the leader loop. Verify the display says
“---“, which means it is stopped. Flip the direction switch to
the desired direction.
• When ready, press the Daedalus logo (Start/Stop). The
wheel will slowly accelerate for 3 seconds to your set speed
%. You can fine-tune your speed while spinning by using
the Up/Down arrows. When it’s time to advance your yarn
guide, press the logo (Start/Stop) and the wheel will slowly
decelerate for 3 seconds and come to a stop.
• Increase or decrease your speed using the Up and Down
arrows. Pay attention to the takeup and adjust the
tension knob accordingly. Fine-tune your speed as you get
comfortable. You will need to slightly adjust the tension as you
change your speed and as the bobbin fills with yarn.