DAD AX32, Руководство пользователя

Страница: 9 / 31

User Manual AX32
Doc no. AX32-8002-A-4 Rev. date 140124 Page 9 of 31
It is essential that all digital signals connected to the AX32 are synchronised to the same basic clock signal.
In order to patch IP Audio channels between different devices, the Dante Controller software tool from
Audinate has to be used.
For details on how to configure the routing matrix, please refer to the section Operation in this
manual.
Operation
The AX32 is controlled via the DADman software and some simple control and status viewing can be made
via the front panel of the unit. The DADman control program interfaces to the unit via one of the rear panel
Ethernet connectors. On the front panel two rows of LED indicators are available for indication of the AD
and DA signal level, an LCD display is available for simple control and for showing various settings of the
AX32. 4 buttons are available for accessing the settings shown in the display.
Figure 4, Front panel layout
Front panel layout
1. 16 LED indicators for signal level indication of the analogue AD input.
2. 16 LED indicators for signal level indication of the analogue DA output.
3. 4 buttons for operating the status display.
4. Status display.
Front panel LED’s
AX32 has two rows of 16 LED indicators on the front panel showing the signal status for the AD inputs and
DA outputs.
AD Signal of AD channel 1-16. Yellow indicates
OL/Signal signal input above -42dB FS, and red indicates
signal above -0.5 dB FS.
DA Signal of DA channel 1-16. Yellow indicates
Signal/carrier signal above -42dB FS. Green indicates signal
below -42dB FS and a valid digital input
source/carrier.