DAD AX32, Руководство пользователя

Страница: 12 / 31

User Manual AX32
Doc no. AX32-8002-A-4 Rev. date 140124 Page 12 of 31
DADman control software
The DADman control software runs on Windows or MAC-OSX computers. Once DADman is installed on
your computer you can open the application. DADman controls the AX32 via Ehernet. Before you can
operate one or more AX32 units the correct network configuration has to be applied.
Assigning the IP address for the computer and the AX32
When the DADman program is installed you are able to finalise the network configuration of the AX32 by
connecting AX32 one by one. You have the option of using fixed IP addresses or IP addresses assigned via
DHCP.
Fixed IP address
You must have a preferred range of IP addresses, and a network mask for the computer network and the
connected AX32 units.
Configure your computer IP address and network mask via the computer control panel to e.g. 10.0.7.25 |
255.255.255.0
Select the AX32 in the DADman Settings/ Device List menu by right clicking the unit line and select
‘Network settings’ when using a Windows PC. On MAC-OSX you use the ‘Action’ button to select ‘Network
Settings’.
Configure via DADman each AX32 in turn with a unique IP address and the preferred network mask e.g.
10.0.7.21 | 255.255.255.0. In this window you can also configure the IP audio network settings
When you are done you can connect more than one AX32 to the network, and they will appear in the
DADman Device List.
Automatic IP address
You must have a network with a DHCP server which will allocate the IP addresses.
Configure your computer IP address via the computer control panel to DHCP.
Select the AX32 in the DADman Tools / Device List menu by right clicking the unit line and select ‘Network
settings’.
Configure via DADman each AX32 in turn to DCHP.
When you are done you can connect more than one AX32 to the network, and they will appear in the
DADman Device List.
Figure 5, DADman Device list in Windows