Dacor Wall Oven, Руководство по установке

Страница: 7 / 12

Turning Off the Power Supply
Before attempting to connect the appliance to
power, turn off the electrical power supply. Also,
always turn off electrical power to the appliance
prior to servicing it.
grounding Instructions
The appliance must be connected to the
power supply with copper wire only. The use
of aluminum wire may result in unsatisfactory
connections. Flexible armored or non-metallic,
sheathed copper cable (with grounding wire)
should be used to connect the appliance to the
junction box. A UL-listed connector must be
used to directly connect the cable to the junction
box.
Be certain to locate the junction box such that
the electrical supply may be easily disconnected
in the event that service becomes necessary.
Also, provide extra slack in the cable to allow
the oven to slide forward for servicing.
This appliance must be electrically
grounded.
Conduit from
appliance
Cable from
power supply
Wire nut
(3 places)
Junction
box
RED
RED
GREEN
WHITE
WHITE
BLACK
BLACK
Connecting the Appliance ground to Neutral Supply
Step 4: Lift and pull door off of oven. Use
gripping points as shown below.
Gripping
Point
Gripping
Point
door Removal: Step 4
With the oven positioned directly in front of the
cabinet cutout, feed the appliance conduit to
the electrical junction box. Then, depending
upon local codes, utilize one of the following
techniques to connect the appliance to the
electrical power supply:
A. Connecting to a Four-wire
Electrical System
1. Separate the green and white appliance
wires.
2. Connect the white appliance wire to the
neutral (white) supply wire in the junction
box.
3. Connect the black appliance wire to the
black (L1) power supply wire in the junction
box.
4. Connect the red appliance wire to the red
(L2) power supply wire in the junction box.
5. Connect the green appliance wire to the
green house grounding wire in the junction
box.
Conduit from
appliance
Cable from
power supply
Wire nut
(4 places)
Junction
box
RED
RED
GREEN
GREEN
WHITE
WHITE
BLACK
BLACK
Connecting the Appliance to a Four-wire Power Supply
Conduit from
appliance
Cable from
power supply
Wire nut
(4 places)
Junction
box
RED
RED
GREEN
GREEN
WHITE
WHITE
BLACK
BLACK
Separate No. 10 (minimum)
copper grounding wire
Clamp must be
tight on pipe
No. 4
copper wire
Metal
water pipe
Clamps
Bare metal
Meter
Connecting the Appliance ground to a grounded Junction Box wire or Cold water Pipe
2. Connect the black appliance wire to the
black (L1) power supply wire in the junction
box.
3. Connect the red appliance wire to the red
(L2) power supply wire in the junction box.
B. Connecting the green
Appliance wire to the Neutral
(white) Supply wire – where
Local Codes Permit
1. Connect the green and white appliance
wires to the neutral (white) supply wire in
the junction box.
C. Connecting the green
Appliance wire to a grounded
Junction Box wire or
grounded Cold water Pipe
– where Local Codes Permit
1. Separate the green and white appliance
wires.
2. Connect the black appliance wire to the
black (L1) power supply wire in the junction
box.
3. Connect the red appliance wire to the red
(L2) power supply wire in the junction box
4. Connect the green appliance wire to a
grounded wire in the junction box or to a
grounded cold water pipe.
5. If connecting to a grounded cold water
pipe, a separate copper grounding wire
(No. 10 minimum) must be connected to a
grounded cold water pipe by means of a
clamp and then to an external grounding
connector screw.