Dacor RNCT304, Инструкция по использованию и уходу

Страница: 11 / 16

9
Parts and Accessories
Description Part Number
Dacor Cooktop Cleaning Creme A300
Razor blade scraper (Ceran scraper) 82499
To order parts and accessories, contact your Dacor dealer or visit www.everythingdacor.com.
Problem Possible Cause Remedy
Food does not heat. No power. See nothing works, above.
Non-magnetic utensil used. Induction cooktops will not work
unless utensil is magnetic. Try
another type of utensil.
No pot or pan placed on cooking zone.
Use proper cookware. See page
5.
Cookware not magnetic.
Cookware curved or warped on
bottom.
Cookware not centered on cooking
zone.
Center cookware on cooking
zone as shown on page 5.
Cookware too small for cooking zone. Move pot or pan to smaller
cooking zone.
Supply voltage too low. Have a licensed electrician check
supply voltage.
Error code appears on display An element may have overheated. Error code E2 indicates that an
element has over-heated. Turn
off the control and allow the
element to cool. Make sure that
all cooling vents on the chassis
are not blocked and make sure
there is nothing covering the
top of the cooktop, other than
proper utensils. Element should
reset after cooling and begin to
work again. If element is still not
functional, call for service.
Fluids spilled or items lying on or near
the controls may cause an error code
to be displayed and the cooktop may
turn off.
Clean up any spills and remove
any items near the controls.
Cooktop needs to be reset. Turn off power to the cooktop,
wait 10 seconds then turn power
back on to see it the error code
clears. If the error code returns,
call for service.
Before You Call for Service