Dacor Renaissance RNWO127, Инструкция по использованию и уходу

Страница: 8 / 48

6
To insert a GlideRack oven racks...
Your oven comes with a set of Dacor GlideRack oven
racks. You can pull a GlideRack oven rack out further than
a standard rack and still support heavy pots and pans
full of food. It is great for heavier foods and the optional
Dacor baking stone.
1. Align both sets of safety clips (right and left) on the
back of the rack guides with the oven rack supports as
shown below. NOTE: The diagram below shows instal-
lation with the rack guides extended but, the rack
may be installed with or without the guides extended,
whichever is easier.
2. Begin to slide the rack in, lifting the front safety clips
over the front of the oven rack supports.
3. Push the rack all the way in.
4. Grasp the rack in the center of the front and pull. The
rack should come forward while the guides remain in
place.
To remove a GlideRack oven racks...
• Grasp the rack with both hands and pull it gently
straight out toward you until it stops.
• Lift up until the front safety clips just clear the front
of the rack supports on the oven. Continue to pull out.
Moving the end of the rack back and forth slightly, left
to right, as you pull, will make it easier to remove.
Racks
You may use either rack type on any level inside the oven.
WARNING
To reduce the chance of burns, position the oven racks when the
oven is cool. If you must reposition a rack when the oven is hot,
use pot holders.
To insert the standard oven rack(s)...
1. Insert the end of the rack with the safety notches into
the oven first.
2. Attach both sides of the rack to the rack supports in
the oven as shown in the diagram below.
3. Begin to slide the rack in, and then, lift up so that the
safety notches clear the ends of the rack supports.
4. Push the rack all the way in with both hands.
To remove the standard oven rack(s)...
• If you want to remove an oven rack, grasp it with
both hands and pull gently straight out toward you
until it stops.
• To remove the rack completely, lift the front of the
rack up about six inches and continue to pull it out.
Lifting the rack releases the safety notches. The
safety notches reduce the chances of a rack coming
out of the oven accidentally.
Operating Your Oven
Standard
Rack
Back of rack
Front of rack
Safety
notch
Slide oven rack
supports into slots
on the rack
Rack
support
GlideRack
Oven Rack
Back of
guide
Oven rack
support
Rack
guides
Front of
rack
Slide oven rack supports
between back safety clips
Lift front safety
clips over rack
supports