3
• Phillips screwdriver
• Electric drill
• 1/2”, 5/8” and 3/32” drill bits
• 1-1/2” wood bit or metal hole cutter
(if metal cabinet is used)
• Saw to cut exhaust opening
(if needed)
• Protective drop cloth for product and
range - you may also use carton for
protection
• Scissors
• Pencil
• Tape measure
• Tape
Figure 4
Parts shown not to common scale.
ITEM NAME
QuANTITy
1
Wood Screw 5 x 30 mm
6
2
Toggle Bolt 3/16 inch
4
3
Top Cabinet Screw 5 x 60 mm
2
4
Flat Washer 30 mm diameter
2
5
Grommet
1
6
Tapping Screw 4 x 12 mm
1
7
Exhaust Damper Assembly
1
8
Deflector
1
9
Mounting Plate
1
The installation hardware (items
1
-
8
) packed with the oven should contain the following:
5 TOOLS RECOMMENDED FOR INSTALLATION
6 INSTALLATION HARDWARE
The following items should also be included with the microwave-hood: grease filters (2), charcoal filter, turntable support, turn-
table (glass), Use & Care Manual, Dacor Convection Microwave Cookbook, Warranty card, turntable racks (2), wall template,
top cabinet template
1
5
6
7
2
3
4
8
9
