Dacor MHTW36, Руководство по установке

Страница: 5 / 8

4
3. Remove the 3 fixed screws.
Removing Fixed Screws
4. Position the electrical box so it is in line
with the holes of the previously removed
screws and tighten.
Position Electrical Box
5. Pay attention that the tear tape of the
electrical box is inside the slot and then
tighten screw.
Tightening Screws
Fixing to the wall
Drill the holes “A” respecting the distances
indicated below.
“A”
5/8” (16mm)
9 1/4”
(235mm)
Fixing to the wall
Fix the appliance to the wall and align it in
horizontal position to the wall units. When the
appliance has been adjusted, definitely fix the
hood using the screws “B” shown below.
“B”
For the various installations use screws and
screw anchors suited to the type of wall (e.g.
reinforced concrete, plasterboard, etc.). If the
screws and screw anchors are provided with the
product, check that they are suitable for the type
of wall on which the hood is to be fixed.
Fixing the hood
Fixing the Decorative
Telescopic Flue
Arrange the electrical power supply within
the dimensions of the decorative flue. If your
appliance is to be installed in the ducting version
or in the version with external motor, prepare
the air exhaust opening.
Adjust the width of the support bracket of the
upper flue.
“C”
Support Bracket
Then fix it to the ceiling using the screws “C” (as
shown above) in such a way that it is in line with
your hood and respecting the distance from the
ceiling indicated in the image to the left.
Connect the flange “D” to the air exhaust hole
using a connection pipe.
“D”
“E”
Insert the upper flue into the lower flue. Fix
the lower flue to the hood using the screws “E”
provided (as shown above), extract the upper
flue up to the bracket and fix it with the screws
“F” (as shown below).
“F”
Fixing Lower Flue to hood
Fixing Upper Flue to hood