Dacor HIPR30S, Руководство по установке

Страница: 17 / 24

17
Installation Instructions
Preparing for Installation, cont.
Installing the Anti-tip Bracket and Foot, cont.
Wall-Mounting the Anti-tip Bracket
For this option to be suitable, the forward edge of the range's front panel must be 26 1/2” (67.3 cm) or less
from the wall, and the bracket screws must be able to engage the base plate inside the wall. Notches on
the sides of the bracket indicate the minimum height of the base plate to ensure secure threading.
6. With a 1/8” bit, drill four 1 5/8” deep holes perpendicular to the screw-seating surfaces shown.
7. With the four included #12 x 1 3/4" screws, attach the bracket to the wall as shown.
ANTI-TIP BRACKET PLACEMENT
Dim. 30 36
C 14 1/8” (35.9 cm) 14 1/8” (35.9 cm)
1. Using product dimensions on Pg. 13 and actual cabinet/
cutout dimensions, determine the position of the range's
centerline and front panel when the range is in its final
position.
2. Based on the diagram on Pg. 18, determine and mark the
position of the anti-tip bracket. Set the bracket in place
against the wall.
3. With a pencil, make a dot at the notches on both sides of
the bracket.
4. With a 1/₁₆” bit, drill test holes in the wall at both dots.
Drill just deep enough to see if the bit contacts the base
plate. If so, wall-mounting is suitable. If not, you must
either floor-mount the bracket, or alter the wall, adding
base material above the notches.
5. Having determined the wall-mounting is suitable, place
the bracket against the wall in the mounting location.