Dacor Epicure EF36IWFSS, Инструкция по использованию и уходу

Страница: 10 / 20

8
Dispenser Light
NOTES:
„
The dispenser lights are LEDs which should not need to be
changed.
„
When you use the dispenser, the lever will automatically turn
the light on. If you want the light to be on continuously, you
may choose either On or Auto.
AUTO: The light sensor monitors the
light level in the room. The dispenser
light will illuminate at half-power when
the light level is low. To activate the
Auto option press the Light touch pad.
The Auto indicator light will illuminate.
ON: For continuous light, press the Light touch pad a second
time. The On indicator light will illuminate.
OFF: To turn the dispenser light off, press the Light touch pad a
third time.
Dispenser Lock
The dispenser can be locked for easy cleaning or to avoid
unintentional dispensing by small children and pets.
NOTE: The dispenser lock does not shut off power to the product,
to the ice maker, or to the dispenser light. It just deactivates the
dispenser lever.
To Lock and Unlock Dispenser:
1. Press and hold the LOCKED touch pad for
three seconds to lock the dispenser. The
indicator light will illuminate when Lock is on.
2. Press and hold the LOCKED touch pad again
for three seconds to unlock dispenser. The
indicator light will turn off.
Refrigerator Operation
Water and Ice Dispenser
IMPORTANT:
„
After connecting the refrigerator to a water source, flush the
water system. Press the Water touch pad on the control panel.
Use a sturdy container to depress and hold the dispenser
lever for 5 seconds, then release it for 5 seconds. Repeat
until water begins to flow. Once water begins to flow, continue
depressing and releasing the dispenser lever (5 seconds on, 5
seconds off) for an additional 5 minutes. This will flush air from
the filter and water dispensing system. Additional flushing may
be required in some households. As air is cleared from the
system, water may spurt out of the dispenser.
NOTE: After 5 minutes of continuous dispensing, the
dispenser will stop dispensing water to avoid flooding. To
continue dispensing, remove the container and press the
dispensing lever again.
„
Allow 24 hours for the refrigerator to cool down and chill water.
Dispense enough water every week to maintain a fresh supply.
„
Allow 24 hours to produce the first batch of ice. Discard the
first three batches of ice produced.
Dispenser Operation
The dispenser will dispense either water or cubed ice.
NOTE: The DISPENSE WATER control allows you to fill
containers that will not fit within the dispenser area, such as sport
bottles.
1. Select either water or cubed ice by touching the Water or Ice
pad on the control panel. The light above the control indicates
your selection.
2. Press a sturdy container against the dispenser lever.
IMPORTANT: You do not need to apply a lot of pressure to the
lever in order to activate the dispenser. Pressing hard will not
make the water or ice dispense faster or in greater quantities.
3. Remove the container to stop dispensing.
Cut Hazard
Use a sturdy glass when dispensing ice.
Failure to do so can result in cuts.
WARNING
COOLING
LOCKED
AUTO
DISPENSE
WATER
ON
PRESS 3 SEC PRESS 3 SEC
OFF
Water Ice
COOLING
LOCKED
AUTO
DISPENSE
WATER
ON
PRESS 3 SEC PRESS 3 SEC
OFF
COOLING
LOCKED
AUTO
DISPENSE
WATER
ON
PRESS 3 SEC PRESS 3 SEC
OFF