Page 2-17
s
eCTion
2 - T
eChniCal
o
rienTaTion
FoodSaver™ Drawers
The FoodSaver™ drawers are like having two additional mini-refrigerators
in the fresh food compartment. The temperature of these drawers can be
controlled independently of the fresh food compartment temperature. There
are three settings for the top FoodSaver drawer. The first setting is “Off” or
the same temperature as the fresh food compartment. The second setting is
“Citrus” which will maintain a FoodSaver temperature of 38°F while the third
setting is “Produce” or 34°F.
The lower FoodSaver drawer adds the setting of “Meat” that will provide
temperature control at 31°F.
It is possible to have the FoodSaver set at a higher temperature than the
fresh food section. To maintain the higher temperature, a small foil heater
is included. With the combination of a dedicated temperature monitoring
thermistor, an independent damper and a circulation fan, temperature control
in the FoodSaver module will be within one degree of the set temperature.
Condensation has always been a problem in crisper drawers. This is one of
the main advantages of the FoodSaver drawer over a crisper drawer. The
cabinet air does not flow through the drawer itself. The cooling air flows
around the drawer in an outer jacket.
Part of the inner liner is a polymer film. This film is sensitive to humidity
levels. If the humidity inside of the drawer gets excessive, the pores in this
film expand and let the moisture out. This moisture will condense on the
evaporator coil and be removed during defrost. When the humidity levels are
in the correct range, the pores in the polymer will close.
With the combination of good temperature and humidity control, it is possible
for contents in the FoodSaver drawer to last much longer than in a standard
crisper drawer.
NOTE (CONTINUED)
The maximum number of bins in the fresh food door is four. Looking
at the chart, if there are four pickoff bins in the fresh food door, it is
not recommended to add a dairy bin.
The maximum number of shelves in the fresh food section is four. If
there are two Food Storage Drawer shelves, there should only be two
other shelves installed.
When considering the freezer interior, the recommended number
of shelves are in addition to the two wire baskets that are already
included with the base models.
One of the biggest airflow issues would arise from adding too many
Food Storage Drawers. It is recommended that no more than two
Food Storage Drawers be installed.
•
•
•
•
Содержание EF42 Series
Страница 2: ......
Страница 12: ...Page 1 9 Section 1 Product Familiarization 48 DISPENSER MODEL ...
Страница 14: ...Page 1 11 Section 1 Product Familiarization 48 NON DISPENSER MODEL ...