Using the cooktop burners
Ignition
CAUTION
The knob LED indicates if a burner knob has been turned on.
It does not indicate if the
burner flame is on.
Check for an actual flame, although the knob LED is on or off.
Make sure all cooktop burners are properly
installed. To light a burner:
1. Push in the control knob, and turn it to
the Lite (flame icon) position. The knob
LED turns on and a “click-click-click...”
sound indicates the electronic ignition
system is working properly.
2. After the burner ignites, turn the knob
to the desired cooking level.
NOTE
When the inner/outer flame is on HI, the outer flame gets smaller as you turn the knob
from HI to LO. To control the inner flame, push and turn the knob again at the point that it
starts to control the inner flame.
English
19
