English 29
Ins
tallation ins
truc
tions
Step 13. Check the ignition of surface burners
Check the operation of all cooktop burners after the range has been installed and
assembled, gas supply lines have been carefully checked for leaks, and electrical
power cord has been plugged in.
All surface burners have electronic ignition.
To turn on a surface burner:
1.
Push in the control knob, and then
turn it to the
LITE
position. You will
hear a "clicking" sound indicating the
electronic ignition system is working
properly. The burner will light in about
4 seconds, after the air has been
purged from the supply line.
2.
After the burner lights, turn the control
knob to the desired setting. The
"clicking" sound will stop and the flame
height will change from Max. to Min.
during turning the control knob.
3.
Repeat steps 1 and 2 to check the
operation of each surface burner in
succession.
Step 12. Assemble the surface burners
CAUTION
Do not operate the surface burners without all burner parts in place.
1.
Position surface burner heads on top of the surface burner manifolds. The
electrodes will fit into the slot in the bottom of the heads. Make sure the
surface burner heads are flat and parallel with the cooktop.
2.
Place the matching size caps on top of each surface burner head.
Top
Bottom
3.
Place the left and right surface burner
grates on the cooktop. The edges of the
grates should match up with the edges
of the cooktop.
NOTE
•
Grates should be placed on its own
position.
•
You can recognize the right position of
the grates by checking the bottom side
of each. Look for engraved position on
right and left grate, “RIGHT REAR” and
“LEFT REAR” respectively.
•
The grates are heavy. Be careful while
handling the grates.
Install_DOP30T940DS_DA_DG68-01457A_EN.indd 29
Install_DOP30T940DS_DA_DG68-01457A_EN.indd 29
2022-10-11 오전 11:37:06
2022-10-11 오전 11:37:06
