background image

1

Important Information About 

Safety Instructions

•  The 

Important Safety Instructions

 and warnings in 

these instructions are not meant to cover all possible 

problems and conditions that can occur. Use common 

sense and caution when installing, maintaining or 

operating this or any other appliance.

•  Always contact the Dacor Customer Service Team 

about problems and conditions that you don’t under-

stand.

Important Safety Instructions

Safety Symbols and Labels

 DANGER

Immediate hazards that 

WILL

 result in severe personal 

injury or death.

 WARNING

Hazards or unsafe practices that 

COULD

 result in 

severe personal injury or death.

 CAUTION

Hazards or unsafe practices that 

COULD

 result in 

minor personal injury or property damage.

 DANGER

To avoid the possibility of explosion or fire, do not store or use combustible, flammable or explosive vapors and 

liquids (such as gasoline) inside or in the vicinity of this or any other appliance. Also keep items that could explode, 

such as aerosol cans away from range or cooktop and range hood. Do not store flammable or explosive materials in 

adjacent cabinets or areas.

 WARNING

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE 

FOLLOWING:

a)  Use this unit only in the manner intended by the manufacturer. If you have questions, contact the 

manufacturer.

b)  Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting 

means to prevent power from being switched on accidentally. When the service disconnecting means 

cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

 WARNING

WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE 

FOLLOWING:

a)  Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable 

codes and standards, including fire-rated construction. 

b)  Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel 

burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and 

safety standards such as those published by the National Fire Protection Association (NFPA), and the 

American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code 

authorities.

c)  When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
d)  Ducted fans must always be vented to the outdoors.

 CAUTION

For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

READ AND SAVE THESE INSTRUCTIONS

Содержание Discovery PHW Series

















Отзывы: