Dacor DHW301 Скачать руководство пользователя страница 4

Страница: 4 / 4

STEP 12

Remove the baffle type filter(s) from

the hood. To remove, hold the baffle

in place with one hand, while pull-

ing down on the release lever. As

you pull back on the lever, lower the

baffle down and out of the hood.

STEP 13

Remove the protective plastic from

the charcoal filter(s) included with

the kit.

STEP 14

Insert the charcoal filter(s) into the opening the baffle(s) where removed from in step

12. The hood is designed to allow for both the charcoal filter and the baffle filter to fit

inside the hood at the same time. When you insert the charcoal filter, make sure the

removal tab is toward the front, on the bottom. See diagram below.

STEP 15

Reinstall the baffle filter(s).

Dacor ● 14425 Clark Avenue, City of Industry, CA 91745 ● Phone: (800) 793-0093 ● Fax: (626) 403-3130 ● www.dacor.com

Baffle type filter

Release

lever

Reinstall baffle type

filter with charcoal

filter underneath

Charcoal filter

Removal tab

Содержание DHW301

Страница 1: ...a recirculating configuration in instances where exhausting the hood outside the building is not practical or desired The kit consists of a top cap and charcoal filter s When installed the top cap red...

Страница 2: ...ation instructions STEP 5 Wire the hood according to the hood installation instructions STEP 6 Measure the distance between the top of the hood and the ceiling where the chimney mounting bracket is in...

Страница 3: ...cowling on the top of the hood Use a level to make sure the duct is vertical Drill pilot holes as necessary for the sheet metal screws STEP 10 Attach the top cap to the top of the duct in stalled in...

Страница 4: ...opening the baffle s where removed from in step 12 The hood is designed to allow for both the charcoal filter and the baffle filter to fit inside the hood at the same time When you insert the charcoa...