1 in.
(25 mm)
7
/
8
in.
(22 mm)
5
/
8
in.
(16 mm)
1.
Check the size of the sink’s drain hose
connector. If needed, cut the drain hose
so its end fits into the sink connector.
NOTE
• If the drain hose does not fit into the
sink connector, you can purchase an
adaptor at a plumbing/hardware store.
• The drain hose can be extended up to
118
1
/
8
" (3 m).
2.
Insert the drain hose into the sink
connector, slide the hose clamp to the
end of the hose, and then tighten the
hose clamp.
3.
If the sink does not have an air gap,
detach the hose holder from the
dishwasher, and then cut off the
protruding part from the holder as
shown.
English
30
Ins
tallation
Installation
DD68-00250L-00_IB_DACOR_DW8700B_EN.indd 30
2024-01-11 3:09:32