Dacor DARWIN, Руководство пользователя

Страница: 21 / 33

20
S
IMUL
- R
EPETITIVE DIVE
To simulate a repetitive dive, wait until the
desired "surf-time" has elapsed in the simulation,
then press the <-> button to start the new
descent. If a decompression stop is omitted during
the simulated dive, it will not be possible to do a
repetitive dive because the DARWIN will lock out,
going into Stop mode.
To exit SIMUL mode, press <Mode> and <->
simultaneously.
LOGBOOK
LOGBOOK mode enables the user to view the data
recorded for the last 50 dives, organized like the
pages of a "logbook", with the number "1" assigned
to the most recent dive, "2" to the preceding dive,
and so forth up to dive number "50". For the 50
most recent dives, and with a maximum limit of
approximately 38 hours, it is possible to view the
individual profile points of each recorded dive.
When the LogBook memory is full and the user
dives again, the oldest dive record is deleted to free
up memory for the new data.
Fig. A shows the different ways for accessing SURF
mode, i.e by pressing the <Mode> button from
SIMUL mode or by pressing the <-> button from PC
mode.
The display shows the history data (fig. 38), i.e.:
Total number of logged dives.
Total dive hours logged.
Maximum logged depth.
FIG. 38
Pressing the <Mode> button for approximately 2
minutes (fig. F), activates scrolling of the dives. The
display shows the following details for the most recent
dive (fig. 39):
Sequential number of the dive (1 = most recent).
Start dive date and time.
FIG. 39
Pressing the <Mode> button scrolls through the
dives in memory.
Pressing the <-> button displays page 2, which
contains the summary details of the currently
selected dive. These are:
Dive mode: Air (fig. 40), "Nitrox" (fig. 41) or
"Bottom Time" (fig. 42).
FIG.40
FIG. 41
FIG. 42
Indication of "Stop Mode" dive.
Fresh or Sea water.
In case of a "Nitrox" dive.
Darwin.qxd 29/03/2002 16.45 Pagina 20