DACELL CO., LTD
http://www.dacell.com
TEL:+82-43-2602242, FAX : +82-43-2602245
5
3. DISPLAY and KEY operation
1)DISPLAY
: 4½ Digit LED
2) L.E.D Display
* Key operation start : press to MODE key.
Key operation exit : press to ENT key.
* Display : setting mode and operation mode.
1. Setting mode : data confirmation or correction.
2. Operation mode : normal operation state.
3. Press to MODE key : setting mode.
Press to ENT key : operation mode.
LED state
Description
operation Display operation mode of high relay.
HI
setting
Confirm and adjust high data
operation Display operation mode of low relay.
LO
setting
Confirm and adjust low data
FS
setting
Confirm and adjust full scale data.
Input the full range or capacity of sensor.
DP
setting
Confirm and adjust decimal point.
CAL
setting
key in sensor output data ( mV/V )* refer to 6 - 1)
FS+CAL
setting
auto calibration execution mode.
cal data is adjusted automatically.* refer to 3 - 6)
FS+ DP
setting
Adjust display time and unit of
measurement data* refer to 6 - 2)
DP+CAL
setting
Software adjustment mode.* refer to 6 - 3)
FS+ DP+CAL operation Set or reset data lock mode* refer to 3 - 4)
