WIRING AUXILLARY EQUIPMENT
All auxiliary equipment should be connected with caution as an incorrect connection could lead to the P.C.B being damaged. Consult the
wiring diagrams below. All power should be removed from the P.C.B. before any connections are made.
WIRING DURATRONIC INFRA-RED BEAMS (RECOMMENDED)
INF JUMPER on the main PCB
To be removed before beams are connected.
MAIN P.C.BOARD
NB
Beams shown with front covers
removed.
Covers must be in place when beams are
active. Ensure that the correct cover is
replaced onto the correct beam. As this
may cause faulty operation if the covers
are incorrect.
12 VOLT
GROUND
Note
although the installation of infra-red safety beams does reduce the risk of the gate
striking an object while closing it does not guarantee against it.
+ - C NC
+
Содержание Compact
Страница 12: ......
