Power input
6-24V DC
(12V Recommended)
SIM CARD
MICRO SIM
PUSH-PUSH
Electrical Connection -
VERY IMPORTANT
When connecting power to the telephone it is important that a suitably rated power supply is
used
and the polarity of connection is carefully selected. Suitable power supplies are 12
V
DC
battery
[can be charged via solar panel] or a constant 12
V
DC mains Power Pack with a power
rating of
2 Amps or 25 watt. Power consumption will be dependant on usage, please consult
with your
supplier for advice concerning suitable power options for your particular application.
The HOOK LED indicator should be OFF when the telephone is ON HOOK and should be ON
when the telephone is OFF HOOK. During incoming ringing the LED will flash slowly and if a
FAST FLASH is observed this indicates that the telephone is NOT registered on the network.
When configured the INPUT / OUTPUT Terminals monitor a CHANGE OF STATE ONLY and
are volt free contacts.
ANTENNA
CONNECTOR
LOAD Connector
(Remote Contact)
Activated In call
by pressing #1234
(# follow
e
d by PIN)
- +
Содержание RA711-GSM
Страница 1: ...DAC LIMITED USER GUIDE RA711 GSM ...
