DAC RA711-GSM, Руководство пользователя

Страница: 11 / 12

Quick Start Guide
1.
Unpack telephone, you have been supplied with:
Ÿ
RA711-GSM Telephone
Ÿ Mains power pack 12V DC 2A
(optional)
Ÿ
GSM Antenna
(optional)
2.
Insert valid SIM card into telephone SIM holder
3.
Connect
a
ntenna ensuring instructions are followed on page 3 [Electrical connection]
4.
Connect power supply [telephone will take up to 3 minutes to initially connect to network,
however this normally occurs in less than
60
seconds]
5.
At this stage you can call the telephone [telephone number determined by SIM card], however
the telephone will not dial out until a number is stored in the internal memory.
6.
If required, store a number in the internal memory by utilising the CVC [Configure Voice Call]
command. Send a text message to the telephone as follows:
C44XXXXXXXXX
You will receive a message back from the telephone confirming that you have configured
the voice call number.
When the telephone is operated [call button is pressed] it will now dial the telephone number you
have stored in the memory.
Ensure you send text message with full stop and country code [as
written
here] followed by valid telephone number