Dabi Atlante Spectro 70X Series, Руководство пользователя

Страница: 40 / 44

40
Upon coming across any problem in operation, follow the instructions below to check and
repair the problem, and/or get in touch with your representative.
UNFORESEEN EVENTS – SOLUTION OF PROBLEMS
Imprevistos Provável Causa Soluções
Problem Probable Cause Solution
- Not functioning properly. -Damaged fuse.
-Lack of power.
-Turn the device off and call a
technician.
-Check the wiring.
-At radiography appears
a semi circle.
-Wrong positioning of cylinder. - R a d i o g r a p h u s i n g t h e
parallelism technique, using
for that auxiliary lines of
collimator cylinder.
-Radiography totally dark. -Excess of XR time;
-Development;
-Developer with inadequate
temperature.
-Developer with inadequate
mixture.
- Check if the time is well
a d j u s t e d a c c o r d i n g t o
radiographic techniques table;
-Check the development time.
-The quicker is the developer
action the bigger is the solution
temperature.
-Prepare the mixture again.
NOTE: Kodak developer does
not use mixture.
-Radiography with a dark targe. -Development Camera with
light penetration.
-Avoid light output.
Message in the Display:
- A1
- A2
- A3/A5
- A4
- Sb
-Invalid Voltage:
Voltage higher than the
equipment’s limit.
-Invalid Voltage:
Voltage lower than the
equipment’s limit.
-Fault in electrical network.
-Exposure error:
Shutter button released before
time.
-Protection against excessive
tube heating.
-Check the supply voltage
-See about overpotential
protection on page 12.
-Check the supply voltage -See
about overpotential protection
on page 12.
-Turn on the equipment. In
case of failure lasts, request a
technician service.
-Turn on the equipment.
-Wait for the correct cooling
time to reestablish the normal
functions - see page 12 –
cooling item.