11
Coupling to the micromotor
Ensure that the connection of the instrument is compatible with that of the equipment. In order
to couple it, press the instrument on the coupling of the micromotor until it is fastened (fig. a). To
uncouple, by means of pressure, pull out the Handpiece.
Before putting it into operation for the first time, follow lubrication procedures (see page 14).
OPERATION OF EQUIPMENT
fig. a
fig. a
fig. b
fig. c
fig. c
fig. b
fig. d
Warning
Never place or remove the instrument when the micromotor is functioning.
Warning
Make sure that the bur is fitted up to
the end for a proper fixing (fig. d). Use
standardized burs of a good quality.
Burs with very long shanks can produce
excessive vibration reducing the useful
life of the bearings.
Fastening of Bur type lock blade (32 CA / SL 30)
Fastening of Bur type Push Button (32 CA PB / 32 CA PB SPRAY / SL 30 PB)
Turn the lever in a counterclockwise direction (fig. a).
Insert the bur in the hole and turn it until locking on the limiter (fig. b).
Upon touching the limiter with the bur turn the lever to the start direction to lock the bur (fig. c).
On PB (Push Button) system, fit the bur into
the guide and turn it until it locks on limitator
(fig. c). Then press the head button and move
the bur until it reaches the end of the limitator,
releasing the head button (fig. c).
