ENGLISH
48
C1
Pump phase current
C1
Pump phase
current
PR
Remote pressure sensor
RM
Maximum speed
TE
Heat sink
temperature
RS
Revs per minute
EK
Low pressure function
on suction
NA
Active devices
Pin
Pressure at intake
TE
Heat sink
temperature
PK
Low pressure
threshold on suction
NC
Max. simultaneous
devices
Hours switched on
Working hours
Number of starts
RT
Direction of rotation
IC
Device configuration
PI
Power histogram
ET
Max. switching time
Multi-pump
system
AY
AntiCycling
NT
Mains information
AE
Anti-blocking
VE
HW and SW
Information
AF
AntiFreeze
RF
Reset faults and
warnings
PW
Modify Password
Key
Identifying colours
Modification of parameters in multi-pump assemblies
Set of sensitive parameters. The modification of one of these on
any device results in automatic alignment on all the other devices.
Parameters that automatically align in all devices. It is tolerated that
they may be different from one device to another.
Setting parameters that are significant only locally.
Read-only parameters.
Table 5
7.2 Access by name with a drop-down menu
The selection of the various menus is accessed by name. From the main menu you access menu selection
by pressing either of the ^ or
˅
keys
.
Once positioned on the desired menu, it can be accessed by pressing MODE.
The available MENU items are: MAIN, USER, MONITOR and EXTENDED.
To access the Extended Menu, the access key is required, which coincides with the key combination shown
in Table 4.
The order of the menus is: User, Monitor, Setpoint, Manual, Installer, Technical Assistance.
Unlocked menus remain available for 15 minutes or until they are manually disabled through “Hide advanced menus”.
Figure 13 shows an operating diagram for selecting the menus.
Figure 12
